Thermal conductive sheet (thickness: 1.0 mm) (HF-SC441)
在庫数182
Soft, thermally conductive sheet (1 mm) with a thickness of 5 W/m-k thermal conductivity
Prices have been revised effective July 1, 2023.
Thick and soft, it can flatten the heat sink mounting surface even if there are small irregularities. It can be easily cut with a knife, etc., so it can be attached to small parts. Non-silicone type does not generate siloxane gas that may cause contact failure. The insulating nature of this product allows it to be attached to substrates with chip components. By combining sheets of different thicknesses, heat sinks can be installed to match the height of not only the IC but also the surrounding components. Two variations are available in different thicknesses.See variations with different thicknesses
Main specifications
- Model No.
- HF-SC441
- RoHS directive (10 substances)
- Compliant
- Material types
- Acrylic Thermal Conductive Sheet
- Body size
- 40 x 40 x 1.0 mm
- Number of pieces
- 1 piece
- Product size (including packaging, approx.)
- 75 x 120 x 3 mm
- Weight (including packaging, approx.)
- 8g
- JAN code
- 4931442544462
- Country of origin
- Japan
- Caution
- This product does not have strong adhesive strength like tape or glue. Please be sure to fix the heat sink when installing this product.
- Thermal Conductivity
- 5W/m-k
- Dielectric breakdown strength
- 2.0kV
- Storage temperature range
- 35°C or lower
- Operating temperature range
- -40~125℃
- Withstand voltage
- 1.2kV
- Peeling strength
- 0.69psi (0.0048MPa)
- Flame resistance
- Equivalent to UL94V-0
★Products are sold one at a time. Please refer to the following if you would like to consider per case.
- Number of cases (boxes)
- 10 pieces in a small box
- Box size (approx.)
- 80 x 180 x 50 mm
- Small box weight (approx.)
- 110g
hfsc441