Printed Circuit Board Etching Equipment (ES-800M)
受注生産
Original price
¥3,036,000
-
Original price
¥3,036,000
Original price
¥3,036,000
¥3,036,000
-
¥3,036,000
Current price
¥3,036,000
(Prices include tax)
Etching machine that emphasizes workability, reproducibility, and safety
Prices have been revised effective July 1, 2023.
The double-sided shower type enables high quality etching in a short time. Microcomputer control of liquid temperature setting and conveyor speed ensures reproducibility under the same conditions. Although it is a stationary type, it can be placed anywhere with a space of 1,110 x 770 mm, making it a compact design for an etching system.
Main Specifications
- Model No.
- ES-800M
- Material types
- Hard PVC
- Body size
- 925×730×1460mm (with piping cover and filter attached)
- Number of units
- 1 unit
- Main unit weight (excluding packaging)
- Approx. 130kg
- JAN code
- 4931442538003
- Country of origin
- Japan
- Accessories (Contents of set)
- 20L tank for waste liquid collection x 3
- Replenishment parts
- Small scrubber: KS-8 (sold separately)
- Caution
- A separate delivery charge is required for this product. The amount varies depending on the delivery area. The price shown is for the main unit only and does not include installation and training fees.
- Appearance
- Ivory
- Input power supply
- AC 100V 50/60Hz 1.4kVA
- Etchable substrate dimensions
- Minimum width 100mm, Maximum width 330mm
- Processing process
- Feeding → etching → squeezing → rinsing tank
- Maximum processing size
- Width 330mm
- Minimum processing length
- 100mm
- Conveyor pitch
- 45mm
- Chamber length
- 400mm (effective length 300mm)
- Conveyor speed
- 0.04 to 1.74m/min (variable)
- Maximum etchant volume
- 40L
- Max. rinse tank volume
- 4.5L
- Processing liquid
- Ferric chloride solution (designated as H-20L by Sanhayato)
- Liquid temperature setting range
- 25～42℃
- Liquid temperature display range
- 0～50℃
- Preheat timer setting
- 0.5 to 72 hours in 30-minute increments (2 patterns)
- Etching section nozzle header
- Upper and lower 3 nozzles
- Etching section spray nozzles
- Flat nozzles, 12 each top and bottom
- Etching section spray pressure
- Max0.17MPa
- Etchant filter
- Sumitomo 3M Cuno1M1 housing
- Etchant heater
- 2 x 500W quartz heaters
- Drain valve
- 2 locations (1 for etchant, 1 for rinse tank)
- Safety device
- Top lid interlock mechanism, emergency stop button, leakage breaker, liquid temperature sensor, liquid level sensor, pump/conveyor/heater failure detection
es800m