Etching System for Printed Circuit Board (ES-800M-FS)
受注生産
Original price
¥3,643,200
-
Original price
¥3,643,200
Original price
¥3,643,200
¥3,643,200
-
¥3,643,200
Current price
¥3,643,200
(Price including tax)
Etching machine with exhaust gas treatment unit
Prices have been revised from August 1st, 2025.
We have set the exhaust gas treatment unit in an etching machine that can handle high quality processing in a short time. The liquid temperature setting and conveyor conveyor conveyor conveyor speed can be controlled by microcomputer, allowing for reproducibility under the same conditions. It is a stationary type, but can be placed anywhere with a space of 1,110 x 770 mm.Etching MachineIt is a compact design.
Main specifications
- Model number
- ES-800M-FS
- Material types
- Hard PVC
- Quantity
- 1 unit
- Body weight (excluding packaging)
- Approximately 135kg
- JAN Code
- 4931442538010
- country of origin
- Japan
- Accessories (set contents)
- 3 20L tanks for waste liquid recovery, exhaust gas treatment unit: ES-F2
- Refill parts
- Small scrubber: KS-8 (sold separately)
- Note
- This item requires separate shipping fees. The amount varies depending on the area where it is sent. The displayed price is for the main unit only and does not include installation training fees.
- exterior
- ivory
- Input power supply
- AC 100V 50/60Hz 1.4kVA
- Etchable substrate dimensions
- Minimum width 100mm, maximum width 330mm
- Processing process
- Input → Etch → Fold → Wash tank
- Processing Maximum Size
- Width 330mm
- Processing minimum length
- 100mm
- TransportPitch
- 45mm
- Chamber length
- 400mm (effective length 300mm)
- Conveyor Speed
- 0.04 to 1.74m/min (variable)
- Maximum amount of etching liquid
- 40L
- Treatment liquid
- Ferric chloride solution (SunhayatoMade in H-20L)
- Liquid temperature setting range
- 25～42℃
- Liquid temperature display range
- 0～50℃
- Preheat timer setting
- 0.5-72 hours, 30 minute units (2 patterns)
- Etching nozzle header
- Top and bottom three
- Etched Spray Nozzle
- Flat nozzles, 12 upper and lower
- Etched section spray pressure
- Max0.17MPa
- Etching liquid filter
- Sumitomo 3M Kyuno 1M1 Housing
- Etching liquid heater
- 2 500W quartz heaters
- Drain valve
- 2 locations (1 for etching solution, 1 for washing tank)
- Safety Device
- Top lid interlock mechanism, emergency stop button, leakage breaker, liquid temperature sensor, liquid level sensor, pump, conveyor and heater failure detection
- Exhaust treatment
- Includes exhaust gas treatment unit ES-F2.
es800mfs