Medium-drying type Hayacoat Mark2 EF (undiluted type / red / 1kg) (AY-L1010R)
Insulating coating agent for substrates with excellent resistance to moisture and corrosive gases
- Aerosol and Chemical Products
- Conformal Coating for Moisture-resistant and Anti-corrosive
- RoHS compliant
Prices have been revised effective July 1, 2023.
Moisture and corrosion resistant coating agent with excellent gas barrier properties, effective against moisture and corrosive gases. It has excellent insulation properties and improves the insulation reliability of narrow patterns on printed circuit boards, etc. Protects PCBs from salt damage in corrosive gas atmospheres such as hot spring areas and coastal areas. Not regulated by the Ordinance on Prevention of Organic Solvent Poisoning. As a Class 2 petroleum, it is subject to less restrictions on use and storage volume than Class 1 petroleum. There are 2 types with different contents and 6 variations with different colors.See variations with different capacitiesSee variations in different colors
Main specifications
- Model No.
- AY-L1010R
- RoHS Directive (10 substances)
- Compliant
- Quantity
- 1 can
- NET
- 1kg (1.1L)
- Product size (including packaging, approx.)
- 130 x 95 x 190 mm
- Weight (including packaging, approx.)
- 1.3kg
- JAN code
- 4931442410149
- Country of origin
- Japan
- Caution
- Minimum order is 10 cans per lot.
- Main ingredients
- Polyvinyl resin
- Appearance
- Red liquid
- Volume resistivity
- >1013ohm-cm
- Dielectric Constant
- 3.4 (1MHz)
- Dissipation Factor
- 3.5×10-2(1MHz)
- Dielectric breakdown strength
- 12kV/0.1mm
- Pencil hardness
- 2H
- Copper plate corrosion test
- No discoloration (room temperature, 500h)
- Adhesion
- 100/100 (Cross-cut method on copper foil plate)
- Transmission humidity
- <0.25 (g/m)2D, 100 μm)
- Sulfurous acid gas resistance test
- No corrosion on copper foil surface (30±2ppm, 48h)
- Hydrogen sulfide gas resistance test
- No corrosion on copper foil surface (30±6ppm, 48h)
- Heat and humidity resistance test
- No corrosion on copper foil surface (80°C, 90%, 168h)
- Thermal shock test
- No peeling or cracking (-40°C to 125°C, 100 cycles)
- High temperature test
- No change in insulation resistance (120°C, 500h)
- Viscosity
- 55 mPa-s (20°C)
- Specific gravity
- 0.94（20℃）
- Continuous operating temperature range
- -40～125℃
- Flammability
- Flammability
- Hazardous material and content under the Fire Service Law
- Class 4 Petroleum No. 2 (non-water soluble) 1.1L
- Odor
- Specific odor
- Flame retardancy
- Equivalent to UL94 V-0 (not registered)
ayl1010r